Open for submission
EUSPA/OP/12/26 - Personal Microwave Security Scanners
The scope of the current procurement is the supply and installation of personal microwave security scanners. Security scanners are aimed to be used in a data centre environment and as such should contribute to prevent attacks such as sabotage and data theft. The selected contractor shall provide the supply, installation, commissioning, training, and maintenance support for long-term operation. The scanners shall be supplied to the following locations: St Germain-en-Laye (GSMC – France) and San Martin de la Vega, Madrid (GSMC – Spain). Two scanners are foreseen to be bought upon the contract signature, and two additional ones throughout the contract duration in case the estimated need will be confirmed.
EUSPA/OP/18/26 - Provision of Interim Workers to EUSPA
The objective of this procurement procedure (EUSPA/OP/18/26) is to conclude multiple Framework Contracts in cascade with maximum two (2) Contractors for the provision of interim workers to EUSPA as a user, at EUSPA HQ. The subject matter of this procurement procedure is the provision of interim workers to carry out various clerical, secretarial tasks, office management and other equivalent tasks, performed under the supervision of staff in EUSPA HQ in Prague under Czech law.
EUSPA/OP/19/26 - Administrative support services to EUSPA
The objective of this procurement procedure is to conclude multiple Framework Contracts in cascade for the provision of unclassified administrative support services to be delivered from contractor’s premises (Lot 1) and classified administrative support services (entailing management of EU classified Information (EUCI)) to be delivered at EUSPA’s HQ and other offices (Lot 2).
Please kindly note that Corrigendum no 1 along with its three Annexes has been published on 15/07/2026.
EGNOS maritime receiver implementing IEC 61108-7 standard
This Call for Proposals aims at designing, developing, testing, certifying and demonstrating an EGNOS based receiver, fulfilling the requirements defined in the IEC 61108-7 standard, suitable to be embedded within the vessel navigation equipment in order to fully use the ESMAS service.
Corrigendum no 1 and Clarification Note no 1 have been published on 21/07/2026
Receiver box for PRS civilian applications
This call for proposal aims to boost the EU industry competitiveness in the highly strategic domain of authorized, civilian PNT and to foster the equipment of authorized users with the Galileo PRS capacity.
Corrigendum no.1 has been published on 01/07/2026, extending the deadline for submission until 31/07/2026. The Call for Proposals updated following Corrigendum no.1 reflects this updated timeline.
Corrigendum no. 2 (along with its Annexes), Clarification Note no. 1 and Clarification Note no. 2 have been published on 16/07/2026.
Clarification Note no. 3 has been published on 22/07/2026.
Call for experts
Interested candidates are informed that the list of experts created under the previous EUSPA Call for Experts (ref. GSA/CI/07/21) is valid, for the purposes of signing expert contracts, until 10 March 2026.
Starting from the day after the mentioned date, when and if needed the Agency will use the new list established under the advertised Call for Experts (EUSPA-CEI-03-26) according to the terms and the conditions defined in the Call.
EUSPA/OP/02/25 - EGNSS Transversal Service Contractor (ETSC)
The scope of this procurement procedure is to conclude a Direct Contract for the performance of the E-GNSS Transversal Service operations, to ensure the provision of the E-GNSS Transversal Services, as described in the Tender Specifications.
Please note that Corrigendum No. 1 was published on 23/01/2026.
Please note that Corrigendum No. 2 was published on 27/04/2026.
Please note that Corrigendum No. 3 was published on 25/05/2026.
Please note that Corrigendum No. 4 was published on 11/06/2026 (distributed to potential bidders having submitted an NDU).
Please note that Corrigendum No. 5 was published on 1/07/2026 (distributed to potential bidders having submitted an NDU).
Please note that Clarification Note No. 1 was published on 17/02/2026.
Please note that Clarification Note No. 2 was published on 19/03/2026.
Please note that Clarification Note No. 3 was published on 12/05/2026.
Please note that Clarification Note No. 4 was published on 25/05/2026.
Please note that Clarification Note No. 5 was published on 11/06/2026.
Please note that Clarification Note No. 6 was published on 1/07/2026.
Please note that the Industry Day webinar took place on 24 February 2026. The presentation is available here.